ServicesWhole Home Water Filtration
Whole Home Water Filtration in La Vergne
We install whole home water filtration where water enters your home, so every tap, shower and appliance gets cleaner water. We test first, size the system to your water and flow, and tell you plainly what it will and will not remove.
What a whole home filter does, and when it makes sense
A whole home system sits on the main line, usually near the shutoff or the water heater. Water passes through sediment and carbon stages before it splits off to the rest of the house. That means filtered water at the kitchen sink, the shower and the washing machine, not just one faucet.
It is the right call when you are tired of chlorine taste, gritty sediment, or white scale on fixtures. Hard water is common across Middle Tennessee, and it is rough on water heaters, dishwashers and tankless units. Adding a scale or softening stage protects that equipment.
It also helps after rough weather. Storms and line breaks stir up sediment in the mains, and water often runs cloudy for a while once service comes back. A sediment stage catches that grit before it reaches your fixtures. One honest note: a standard filter does not make water safe during an active boil-water notice. Follow the notice first, then let the filter do its job.
What the install includes
- 01
Testing comes first
Before any price, we sample water at your tap for hardness, chlorine, iron and sediment. Those numbers tell us which stages make sense. When sediment and carbon alone will do the job, that is all we suggest.
- 02
Sizing to your flow
We size the system to your bathrooms and how much water you use at once. An undersized filter drops your pressure when the shower and washer run together.
- 03
Bypass valve and shutoffs
Every system gets a bypass. You can change a cartridge or run unfiltered water without shutting off the whole house.
- 04
Pressure gauges
We put a gauge before and after the filter. When the gap between them grows, the cartridge is clogging and it is time to change it.
- 05
Backflow protection
We are backflow certified. We look at how the new equipment ties into your supply so nothing can flow back toward the public line.
- 06
Cleanup and a walk-through
We flush the system, check every fitting, clean up and show you how to change the filter. Our 2-year warranty covers the installation.
Questions about Whole Home Water Filtration?
Call(615) 544-3733Signs your home could use a filter
Chlorine taste or smell
City water is treated with chlorine. Carbon filtration takes out most of that taste and smell at every tap.
White crust on faucets and shower heads
Hard water leaves that chalky mineral layer behind. The same minerals collect in the bottom of your water heater, out of sight.
Grit in aerators or toilet tanks
Sand or sediment showing up, especially after a storm or a nearby main break, means it is reaching your fixtures and valves too.
Orange or brown stains
Rust-colored stains in tubs and toilets usually point to iron. It needs its own filter stage, so we test before we pick one.
A water heater that pops or rumbles
Sediment and scale settle in the tank and make noise as it heats. A filter slows that buildup on the next heater.
How the job goes
- 1
Your call and our visit
You call, we set a time, and we come look at where your main line comes in. We check space, pipe type and the shutoff.
- 2
Test and written estimate
We test your water and explain the results in plain words. You get a written estimate that lists the equipment and labor.
- 3
Install day
We shut off the water, cut the system into the main line and add the bypass and gauges. Most installs take part of a day, and your water is off only while we tie in.
- 4
Flush, check and walk-through
We flush out the new filters, check pressure and look over every joint. Then we show you the filter change and leave the area clean.
What moves the price
No two houses get the same setup, so we price the job after the water test and a look at where your line comes in. The written estimate lists each piece of equipment and the labor on its own line. We take cash and all major credit cards, and you can ask about financing options if you'd rather spread the cost out.
- How many stages you need
- A simple sediment and carbon pair costs less than a system that also treats iron or hardness. Your test results make that call, not a sales pitch.
- How big your home is
- More bathrooms mean more water moving through the system at once. That takes larger housings or tanks.
- Where your main line enters
- A garage wall or utility room is an easy spot to work. A tight crawlspace, or an outdoor install that needs cover from the weather, adds time and materials.
- Work on the pipes already there
- Some houses need a new shutoff valve, a fitting to join two kinds of pipe, or a drain line for a tank that backwashes.
- Replacement filters down the road
- Cartridges and media wear out over time. We tell you about what they cost and how often you will change them before you decide, so the ongoing cost is no surprise.
Questions about whole home filtration
Will my showers feel weaker once the filter is in?
Not if the system is the right size. We match it to the peak amount of water your home pulls at once, like a shower and the washer running together. A clogged cartridge will cut flow, and that is why we add gauges, so you can see it coming.
How often do I change the cartridges?
Sediment cartridges tend to last a few months, and carbon usually goes longer. How dirty your water is and how much you use decide the real schedule. Expect to swap the sediment cartridge early after a storm or a main break.
What do I do after a boil-water notice or a main break?
Keep following the notice until officials lift it. Once they do, run water through the system, change the sediment cartridge if the gauges show a drop, and flush each tap for a minute or two. If the system gives you trouble after a storm, call us any hour for 24/7 emergency plumbing service.
Is the installation under warranty?
Yes. Our 2-year warranty backs the install. We go over exactly what it covers when we give you your estimate.
Can I add a filter when I get a tankless water heater?
Yes, and it is a smart pairing. Scale from hard water wears a tankless unit down quickly. We can plan both jobs together, and our Tankless Water Heater Installation page covers the heater side.
Get a straight answer on your water
We test at your tap, walk you through the numbers and put the right system and its price in writing. We serve La Vergne, Smyrna, Murfreesboro and the towns around them.